Softview LED Strip Light by the foot

Softview™ LED Strip Light (formerly called Low Output) is the perfect fixture for those in need of a soft, low light strip installation. This low light LED strip is exactly half the brightness of our standard Flexible LED Strip Light, so it's ideal for installations that require a touch of soft lighting. It also draws only half the power of our Flexible Strip, so it offers unbeatable energy-efficiency.

Softview™ is also available in a Mist Resist™ version that is designed specifically for use in high-traffic indoor areas where surfaces are exposed to splashes, moisture and dust. It features a silicone housing that protects the strip, so it can be wiped clean with a sponge if mounted near a counter or in a pantry. This wet location LED strip is also protected against mops and foot traffic if mounted at foot-level.

This strip light is available by the foot, so you can order just the right amount for your installation. Softview™ Strip comes with a 3M adhesive tape backing that's easy to mount on virtually any flat surface.

Common applications for the Softview™ include lighting:

• Toe kicks
• Paths, aisles, stairways
• Close application task lighting in high traffic areas
• Under cabinets and near the sink
• Kitchen and bathroom lighting

(Product SKUs: EL-9FLX-WW, EL-9FLX-NW, EL-9FLX-WR-2700)

UL #E348280

Input Voltage: 12V DC
Energy Consumption per ft: 0.72W / 60 mA
Max. length of one run: 18 ft.
Connector Type: (1) 12 in. lead wires, (1) 12 in. lead with DC plug

Sold per: spool
Spool Length: 16.4 ft.
Width: 0.35 in.
Height: 0.1 in. / 0.15 in. (Mist Resist™)
LED Chip Spacing: 1.3 in. (between centers)
Cuttable: every 3 chips / 4 in.

LED Chip Type: 3528 SMD
Ambient Temp. Range: -68° - +176° F / -20° - +80° C
Fixture Surface Temp. 68° - 104° F
UV/IR Radiation: None
Lifespan: 50,000 hours