RGB 4-In-One LED Puck Light Kit
- Plug-and-Play
- Flexible
- Dynamic and Exciting
- Remote controlled
The RGB 4-In-One LED Puck Light Kit is a complete LED under cabinet and shelf lighting package that also adds a splash of color. This 12V color-changing LED kit features a remote control that allows you to change the pucks’ colors and mode, and the pucks themselves are ultra-slim, at only ¼ of an inch deep. And, at only 1.44W of energy consumption per puck, this 5.76 Watt kit is very efficient and emits very little heat. With a full 15 shades of color included in this remote-controlled plug-and-play LED puck light package, home LED lighting has never been more flexible or festive.
This kit includes:
- 4 multi-color LED puck lights, each with a 39 inch cable
- one 4-way splitter
- a remote control that you use to change colors and brightness
- a remote control receiver
- a 12V DC adapter with a 60 inch/5 foot cord
The wireless remote control allows you to change the pucks’ colors, brightness, and mode. Use the controller to shuffle through the available colors of Neutral White, Red, Green, Blue, Amber, Magenta, and Aqua, to set the pucks to Strobe, which cycles through all 7 colors, or for Fade mode, which gradually cycles through all 7 colors. There are also Smooth and Flash modes, offering many possibilities for color-changing LED light.
Assembly and installation of this color-changing LED Puck light kit is easy: just plug the pucks in to the splitter, mount them, plug the splitter into the remote control receiver, and plug that into the adapter, which plugs into a standard household outlet. Tucking the cords away is also easy: the adapter cable and puck cables are both less than 0.1 inches deep! The RGB 4-In-One LED Puck Light Kit is perfect for use in both home and business: it adds a splash of color to any room in your house—whether in the kitchen, a play room, in shelving, a home bar, or in a family room--or to a display or window in your business. Most importantly, these LED puck lights are flexible and will not only provide light but adapt to any mood.
-
Product is better then I expected
Looking for light options for my bar at home. There are many sites/places that will sell you a 12 volt transformer and a 2 watt LED(s) but when I asked how do you put them together (volts and watts not an apple to apple match) I could not get an answer. The item from Elemental LED was ready to go out of the box and the cords are long allowing routing to an electrical outlet, I wish I could include a photo of my project. I will be a repeat customer
Weight: 13 oz.
Kit Includes: (4) puck lights, (1) 4-Way Splitter,
(1) 12V/1.25A adapter, (1) remote control
Input: 100V - 240V AC, 50/60 Hz, 0.7A
Working Voltage: 12V DC
Working Amperage: 1.25A
Power Consumption: 5.76W
Puck Dimensions: W=2.3 in., D=0.25 in.,
Cable=39 in.
Adapter Dim.: L=2.8 in., W=1.6 in.,
D=1.1 in., Cable=60 in.
Remote Control Dim.: L=3.4 in., W=2.1 in.,
D=0.3 in.
Splitter Dim.: L=1.8 in.,
W=1.3 in., D=0.4 in.
Remote Receiver Dim.: L=2 in.,
W=1.4 in., D=0.9 in.
-
Can more than one set of these lights be connected and controlled by a single remote?
Although the kits cannot be daisy-chained together, if you place the infrared sensors (that picks up the commands of the remote control) of two kits near each other, one remote should control both kits simultaneously. The remote sensor can be seen in the product pictures: it's the small black square at the end of the 19 inch wire. -
Hello,
Are these warm lights (3000 deg. K)? Can these lights be hard wired and, if so, do you have the appropriate transformer available to do so?
Thank you.The color on the RGB lights is adjustable, when adjusting the color of the lights, the color temperature will change as well.
To hard wire four of the RGB Puck lights, we carry a 35W Indoor/Outdoor driver would be the recommended replacement for the adapter that comes with the kit. -
Can these lights be used with one of the rechargeable battery packs listed on your site?
Although we have not tried connecting this set to a rechargeable battery pack before, it should work just fine. Because we have not tested that particular set up, we do not have any information on how long the puck lights could run on the battery. -
How do you install the pucks under the cabinet, with screws or tape
Mounting of lights can be done in several ways depending on project needs and limitations. Double sided tape is provided with the All in One Kit. -
Can the puck light leeds be extended for further distances from the power supply?
No, this puck light kit is a self contained system. There are no available accessories for this item.
Loading...