reignbow led color selector
Reignbow LED Color Selector
- For RGB Lights
- Selects one color at a time
- Fits directly into wall box
The Reignbow™ LED Color Selector is a wall-mount LED Dimmer Switch that enables you to select the color of and dim any of our color-changing RGB LED strip light and light bars. With this LED color controller you can choose a single color from your RGB LED lights, so it's the perfect accessory to get one color at a time instead of rotating color-changing lights. It's also an LED dimmer that lets you dim the lights anywhere between 100% and 0%. This low voltage wall switch is ideal for those who want colorful--but not color-changing--smoothly dimmable and color-controllable LED lighting.
This Reignbow™ Color Selector and LED Dimmer Switch features two sliders: one changes the RGB LEDs color and one dims the light fixture. You can choose any level of brightness in the 0% to 100% PWM dimming range. Our Reignbow™ Color Selector allows you to smoothly and easily transition between all the colors of the spectrum.
The RGB LED strip or fixture and this LED dimmer must run on a 12V DC transformer, and can be powered by either a 12V hard-wired driver or a plug-in 12V adapter. This switch is not compatible with our 12V Dimmable Drivers.
This LED color controller fits into a standard light switch wall outlet and has two lead wires to connect to 12V DC power. It features a light bar-style RGB connector that is compatible only with RGB lights.
This product has not been reviewed. You could write the first review.
Weight: 4 oz.
Length: 4 in.
Width: 2.25 in.
Height: 1.4 in.
Connector Type: RGB
Output: 1 channel
Maximum Load: 8A
Maximum Output: 96W (12V), 192W (24V)
Will this controller work with this system?
From Guest at
6/20/12 8:47 AM
High Density RGB LED Strip Light by the spool EL-HDRGBSP $256.99 7 ordered7 shipped $1,798.93
12V Indoor Drivers - 600W EL-LNCDRV600W $319.99 1 ordered1 shipped $319.99
High Power RF LED Color Controller EL-HIRF $45.99 1 ordered1 shipped $45.99
RGB LED Signal Amplifier EL-SJRGBAMP $29.99 4 ordered4 shipped $119.96
LED Adapter Splice Cable
Cable Gender: Male EL-MINESPC-M $3.99 4 ordered4 shipped $15.96
Multi-Color RGB LED Flexible Light EZ Connector EL-RGBSTRPCON $3.99 11 ordered11 shipped $43.89
Multi-Color RGB LED Strip to Strip Connector EL-BVSTRPRGBCON $3.99 2 ordered2 shipped $7.98
Yes, the Reignbow Color Selector would work with your system as a substitute to the High Power RF Color controller you have in the order. The only other piece that you may require is either an RGB Strip Light to Bar Connector, or an RGB LED Light Bar Splice Cable to adapt the end piece of the Reignbow Color Selector to your Strip Light.
Is this controller able to tune the lights to soft and natural white? In the video it looks like it can only do pure white.
From Troy at
9/17/12 7:24 AM
This controller can only do cool white since it is using red, green, and blue chips to produce the white. Our White Balance LED Strip Light, on the other hand, uses three colors of white LED chip to make the whole range of white from warm to cool. You can find it in Shop By Item > LED Strip Lights > White Balance LED Lighting.
I purchased this item to use with my RGB LED strips ... however I can not get it to function. I am using an LED Driver Switching Power Supply Transformer from 110 Volt 50-60 hz to 12 Volt DC.
From Nick at
10/23/12 7:40 PM
Input Voltage:110-130 Volt AC
Output Voltage: 12 Volt DC
Power: 400 Watt
Current: 33 Amp
Is this item only compatible with your RGB LED strips ... or will they work with any brand ?
Please let me know
Although the Reignbow Dimmer Switch technically should be able to control any similar 4-wire RGB Strip Light on the market, we cannot guarantee that it will be compatible with another company's RGB LED Strip Light.
This can also be said for other company's Drivers. Whereas in theory the Driver that you have listed technically should work with the Reignbow Switch, we cannot guarantee its compatibility.
There can be some components within other products that will change the signal, wiring, or voltage slightly causing an incompatibility with certain items.
Can the Reignbow color selector be used to control the color and brightness of 5mm RGB bulbs, or is there a reason it will only work with RGB strips and bars?
From Guest at
1/3/13 6:27 PM
In theory, this Color Selector should be able to control 5mm RGB bulbs. 5mm RGB bulbs have 4 wires running to them which usually denotes that it runs on a 4 channels system (Like the Reignbow Color Selector)
The main issue that you may run into is resistors. Our LED Strip Light has resistor built into them, whereas many bulb LED's do not. Without a resistor, the bulb runs a risk of receiving too much voltage, and burning out.