Reign 12V Dimmer and PWM Injector Package

The Reign 12V Dimmer and PWM Injector Package offers a quick solution for large LED light installations, allowing you to dim large LED strip light installations. Reign 12V Dimmer Switches were engineered by and are manufactured for Elemental to fit right into a standard wall light switch box. These 12V PWM dimmers are connected between the 12V power supply and 12V LED fixture, and will dim any of our LED lights that are capable of dimming. Reign dimmers are ETL Certified. This kit is available in three dimmer styles: button slide, full slide, or touch dimmer. Note: This kit is offered at a discount price because it includes the clearance model of the Reign Dimmer Switch. This switch is warrantied, but non-returnable.

The PWM (Pulse Width Modulation) Injector works with the Reign 12V LED Dimmer Switch and increases the LED lighting output of the dimmer (which has a limit of 100 Watts) from 100 to 160 Watts. Once connected to the output circuit of the Reign Dimmer, the PWM Injector drives an additional 60 Watts, allowing you to put an additional 60W worth of LED lights on a single 12V LED dimmer.

And the PWM signal is opto-isolated and regenerated, meaning several PWM Injectors can be attached to the same Reign LED switch, and control the signal when multiplied over long distances.

The PWM Injector must have its own connection to a 12V DC power supply. It can either be powered by the same 12V Driver as the LED lights or have its own 12V power source, if it needs to be installed at a distance from the Reign switch. It just needs to be drawing its own 12 volts. This 12V DC accessory has one signal input that connects to the output wires of the Reign Dimmer, one signal output that connects to the 12V LEDs, and one 12V power input.

(Product SKUs: EL-REIGNEXT-BS, EL-REIGNEXT-FS, EL-REIGNEXT-RS, EL-REIGNEXT-TCH)

Reign 12V Dimmer specs:
ETL Listed
Weight: 4 oz.
Length: 4.5 in.
Width: 1.75 in.
Depth: 1.7 in.
Input Voltage: 12V DC
Output Voltage: 12V DC
PWM Dimming Range: 0% - 100%
Maximum Wattage: 100W
Switch Type: electronic low voltage

PWM Injector specs:
Weight: 5 oz.
Length: 3.75 in.
Width: 2 in.
Height: 1.2 in.
Voltage: 12V DC
Maximum Load: 5 Amps (60W)
Working Temp.: 68° - 140° F
Connection: common anode
Output: three-CMOS open-drain