Reign 12V Dimmer / PWM Injector / 150W Driver Kit

The Reign 12V Dimmer / PWM Injector / 150W Driver Kit offers a complete solution for large LED light installations, allowing you to dim a larger amount of LED strip light one one dimmer switch. This kit includes all the essentials, apart from the LED lights, to create a large LED setup that allows you to power and dim several runs of LED strips light or LED light bars with one power source and a single 12V dimmer switch.

Reign 12V Dimmer Switches are engineered by Elemental to fit right into a standard wall light switch box. These 12V PWM dimmers are connected between the 12V power supply and 12V LED fixture, and will dim any of our LED lights that are capable of dimming. Reign dimmers are ETL Certified. This kit is available in three dimmer styles: Button Slide, Full Slide, or Touch Dimmer. Note: This kit is offered at a discount price because it includes the clearance model of the Reign Dimmer Switch. This switch is warrantied, but non-returnable.

The PWM (Pulse Width Modulation) Injector works with the Reign 12V LED Dimmer Switch and increases the LED lighting output of the dimmer (which has a limit of 100 Watts) from 100 to 160 Watts. Once connected to the output circuit of the Reign Dimmer, the PWM Injector drives an additional 60 Watts, allowing you to put an additional 60W worth of LED lights on a single 12V LED dimmer.

The PWM Injector must have its own connection to a 12V DC power supply. It can either be powered by the same 12V Driver as the LED lights or have its own 12V power source, if it needs to be installed at a distance from the Reign switch. It just needs to be drawing its own 12 volts.

(Product SKUs: EL-150WREIGNMWK-BS, EL-150WREIGNMWK-FS, EL-150WREIGNMWK-RS, EL-150WREIGNMWK-TCH)

Reign 12V Dimmer specs:
ETL Listed
Weight: 4 oz.
Length: 4.5 in.
Width: 1.75 in.
Depth: 1.7 in.
Input Voltage: 12V DC
Output Voltage: 12V DC
PWM Dimming Range: 0% - 100%
Maximum Wattage: 100W
Switch Type: electronic low voltage

PWM Injector specs:
Weight: 5 oz.
Length: 3.75 in.
Width: 2 in.
Height: 1.2 in.
Voltage: 12V DC
Maximum Load: 5 Amps (60W)
Working Temp.: 68° - 140° F, 20° - 40° C
Connection: common anode
Output: three-CMOS open-drain

150 Watt 12V Driver specs:
Weight: 1 lb., 9 oz.
Length: 7.9 in.
Width: 4 in.
Height: 2 in.
Voltage: 12V DC
Frequency: 60 Hz
Input Current: 2.5A
Rated Power: 150W
Output Current: 12.5A