Rechargeable Li-ion Battery Pack

SKU: EL-ANLION

  • Ultra Lightweight - only 9 ounces
  • Powers one 20” Brighter LED Light Bar for 15 hours
  • Economical

Rechargeable Li-ion Battery Pack

$44.99
In Stock

Our Rechargeable Li-ion Battery Pack is designed specifically to integrate with our Light bars, Flexible LED Lights, or any 12V DC electronic device. The Lithium Ion Battery Pack can be recharged without limitations, as the battery charging process is designed for a slow charge process (10 hours for full charge), which helps the battery pack last longer. Li-ion batteries are commonly found in a laptop or cell phone, due to their compact yet strong nature.

When you purchase our Lithium Ion Battery Pack you will receive:

  • One 3.7” x 2.4”x 1.1” battery box with an integrated On/Off switch
  • An Adapter: 110 to 240V AC, 50/60Hz to 12V, 350mA output
  • An extension cable: with 2 male DC plugs, 26” long

Battery Charging Instructions: Plug the charger to the wall outlet, a red LED on the adapter will light up. Connect the charger cable to the “DC IN/OUT” jack on the battery pack and switch the ON/OFF switch on the battery pack to “ON” position. The green LED will light up during charging. When the green LED is off, the charging has completed.

Battery Overload / Short Circuit protection: This battery pack employs a safety feature that, should any overload / over voltage / short circuit be detected, the battery will automatically cut off the output voltage. In the event that this happens, you will need to recharge the battery again.

  1. Rechargeable Li-ion Battery pack

    This product's price is reasonable, it is easy to carry around and last for 5 hours for just one charge. It can also reduce the chance of battery waste.

Write A Review

Reviewing Rechargeable Li-ion Battery Pack

Lights one 20” Brighter LED Light Bar for 15 hours!
Short Circuit Protection: Yes
Integrated On/Off switch

Input Voltage: 110-240V AC
Output Voltage: 12V DC
Input Amps: 200 mA
Capacity: 3800 mAh (3.8 Amp hours)
Max. Current Output: 2 Amps
Charge Time: < 10 hours

Weight: 9 oz.
Length: 3.7 in.
Width: 2.4 in.
Height: 1.1 in.

Sort by Descending
  1. How long will one foot of Flexible LED Light last on a fully charged battery?

    One foot of our Flexible LED Light will last approximately 12 hours until the battery will need to be recharged.
  2. I would like to know how long your Rechargeable Li-ion Battery Pack would last powering an LED RGB Strip that is 10 feet in length. This would be for movable displays.

    Our Lithium Ion Battery Pack is rated at 1800mAH or 1.8 AH (amp-hours). Our Flexible RGB LED Light consumes 1.25 watts per foot and 12.5 watts for a 10-foot length. 12.5 watts at 12 volts pulls about 1 amp. Since this battery is rated for 1.8 AH (amp-hours), the 10-foot-long Flexible RGB LED Light would last about 1.5 hours.
  3. How long would a 7-foot low output flexible LED be powered on the battery pack?

    This battery is rated at 1800mA hours.
  4. would this battery power a heated jacket,thanks

    It would, as long as the jacket requires 12VDC power. I recommend you check the mAh supplied by the battery to what would be consumed by the jacket to determine if the battery would be sufficient.
  5. Is there a way to fast charge this battery?

    There is no fast charge option for this battery, just the slow charge.
  6. Is the battery included?

    Yes. It also includes a charger and cable.
  7. Can the battery be placed into a wooden compartment that is 1.25 high and 6 inches square or will it overheat

    T

    Yes, there should be no problem putting this is a housing.
  8. Can the battery be used whilst being charged in order to avoid mains spikes on sensitive 12V equipment?

    This battery has only one port that's used for input and output of 12V power. Our High Capacity Rechargeable Lithium-Ion Battery has one input and one output, so it could be used while charging. We haven't tested how constant the current is when the adapter is being plugged in or unplugged.
  9. What is the max output current it can provide at 12 V ?

    The maximum current output is 2 Amps.
  10. How do I calculate how long this battery will power an LED fixture?

    To get the number of hours, simply divide the battery's Capacity (this one is 3800mA) by the light's power consumption in milli-amps (mA), which is listed in the product's Tech Specs tab. The 20 inch Brighter LED Light Bar, for example, uses 300 mA of electricity.

Ask Your Own Question




Join the Conversation at the Elemental LED blog!

Find Elemental LED on Facebook!Find Elemental LED on Twitter!Find Elemental LED on LinkedIn!Find Elemental LED on Flickr!Find Elemental LED on Youtube!
Sign up to receive our newsletter and get a 10% off coupon.
Customer Service: 1.877.564.5051  |  answers@elementalled.com  |  Live Chat
Products  |  Who We Are  |  Terms & Conditions  |  Privacy  |  Shipping Info  |  Returns  |  Contact Us  |  Press  |  Sitemap
Copyright ©2011 Elemental LED. All Rights Reserved.
  Loading...