Pre-Wired Waterproof LED Strips

SKU: EL-JWP

  • UL #E348280
  • 115 Lumens per ft.
  • Plug-and-play
  • 1-foot and 2-foot Lengths
  • Not for use in or around chlorinated or salt water

Pre-Wired Waterproof LED Strips

Suggested Accessories
Product Options
SPECIAL PRICING

Sale $5.99

Orig. $15.99

In Stock

Our Pre-wired Waterproof LED Light Strips are plug-and-play LED lights that make it easy to light small outdoor spaces such as decks and patios. These Pre-wired Waterproof Strips are available in 1 Foot and 2 Foot lengths, and come with a waterproof connector hard-wired on each end, so they're ready to use. These commercial-grade LED strips are designed for exterior and interior home and business use in situations with higher traffic and more rugged conditions. Boaters find LED strip lighting perfect for subtle onboard deck lighting, and yachters love waterproof LED strips for adding light to their galleys or sleeping quarters. Automotive experts use it for brighter, more efficient footwell illumination, in the glove box, under the chassis, or even under the hood. However, this strip light is not intended to be submerged and is not for use in salt water or chlorine conditions.

Waterproof LED Light strips are also ideal for:

  • Restaurants, lounges, casinos, homes and retail stores
  • Aquarium, pool, fountain, garden, greenhouse, and underwater lighting
  • Lighting art and wine cellars (no UV emissions)
  • Outdoor exhibits, special events, and outdoor tent lighting
  • Deck and patio lighting
  • Vehicular accent lighting for limousines, RV's and cars
  • Yachts and cruise ships

Simply attach these Pre-wired Waterproof Strips where you wish with double-sided tape, glue, or our Waterproof Flexible Light Mounting Clips. These LED lights can be powered in a few different ways, depending on the number of strips and the length of each strip. For small groups of these strips, simply connect them to our LED Light Bar Adapter Cable and a 12V Adapter (both sold separately).

 

(Product SKUs: EL-J1WP-WW, EL-J1WP-NW, EL-J2WP-WW, EL-J2WP-NW)

  1. Brightest address block on the street!

    Reviewed on July 6, 2012 by DIGItonium

    The LED strip was used to replace the dull 4-bulb address block light. The end result is a much well lit and clean address block light.

Write a product review here

Need help with a product or recent order? Please contact our customer service team at answers@elementalled.com or 1-877-564-5051 so that we can resolve the issue.

Reviewing Pre-Wired Waterproof LED Strips

UL #E348280

Weight: 0.5 oz. (1 Foot), 1 oz. (2 Foot)
Available Lengths: 12 in., 24 in.
Width: 0.4 in.
Depth: 0.2 in.
Chips per foot: 18
Chip Spacing: 0.65 in. (between centers)
Cuttable: every 3 chips / 2 in.

Input Voltage: 12V DC
Energy Consumption: 1.44W (1 Foot), 2.9W (2 Foot)
Available Colors: warm white, neutral white
Lumens per ft.: 115
IP Rating: 68 (waterproof)

Beam Angle: 120°
CRI: 75 (ww), 80 (nw)
Ambient Operating Temp.: -68° ~ +176° F / -20° ~ +80° C
Fixture Surface Temp.: 68° - 104° F / 20° - 40° C
UV/IR Radiation: None

Not for use in or around chlorinated or salt water.

  1. I want to use these in /on my car. Do you have adapters to power them with power from the car battery?
    Thanks

    From Guest at 8/1/11 5:46 PM
    When connected to a Car/Motorcycle/Boat battery no adapter is required. Virtually all car batteries generate 12v DC which is the exact voltage that these strips require to run.
  2. I noticed the pre-wired waterproof strips have connections at both ends. Will they run with only one side connected or do they both need to be connected?

    From Guest at 8/1/11 5:57 PM
    All of our strip light may be powered from either one end or the other. You will not need to connect both ends to a power source, just one end will be fine.
  3. Are these dimmable?

    From Guest at 1/23/12 9:39 PM
    Yes, these are dimmable.
  4. Im interested in the "orange" tone, is that neutral or warm white?

    From Guest at 8/27/12 7:16 AM
    Warm white is closer to amber, which sounds like what you're looking for.
  5. I want to use these pre-wired waterproof LED strips for deck step lighting. I noticed the first pic of this product is it being used for wall lights in a front yard. However there are grills or housings for the lights. I'm assuming I get those elsewhere and then use your LED light inside? Do you know where I can find the housings?

    From Guest at 10/6/12 6:05 PM
    I am sorry I do not have information on this type of housing. This was a photo taken by one of our customers and I am unsure what type of product they used to house the waterproof strips.

Ask Your Own Question





Explore LED industry news, project tips, and LED education and inspiration on the Elemental LED blog

Find Elemental LED on Facebook!Find Elemental LED on Twitter!Find Elemental LED on LinkedIn!Find Elemental LED on Flickr!Find Elemental LED on Youtube!
Sign up to receive our newsletter and get a 10% off coupon.
Customer Service: 1.877.564.5051  |  answers@elementalled.com  |  Live Chat
Products  |  Our Company  |  Policies  |  Shipping Info  |  Contact Us  |  Press  |  Sitemap
Copyright ©2013 Elemental LED. All Rights Reserved.
  Loading...