Micro Remote Control LED Color Controller
- Compact
- Wireless
- Color Changing
- 16 Color Modes
- Includes remote control
Color-Changing LED Light Bar
$15.99
The pocket-sized Micro Remote Control LED Color Controller allows you to choose the color-changing mode of your 12V or 24V RGB strip lighting or RGB light bar. Just plug the four wires of your RGB LED light fixture into the connector at one end, and the wires of your low voltage LED power source at the other, and you're ready to take advantage of the micro LED controller's 16 different color modes. This controller also comes with a remote control and small flathead screwdriver to help secure the wires of your RGB light fixture to the controller.
This remote control RGB controller's compact size makes it perfect for a variety of custom lighting applications:
- display cases
- artwork
- art display
- custom projects
- built-in lighting for furniture and architecture
The Micro Remote Control LED Color Controller is a great way to get professional-grade LED color control without making a large investment in color-controlling equipment. All of our RGB strips and LED light bars require a color controller to interface between the fixture and the 12V power source. Compact and powerful cutting edge devices of LED technology have never been so accessible.
Weight: 1 oz.
Length: 3.5 in.
Width: 1.65 in.
Height: 0.5 in.
Remote Control dim.: 3.1" x 1.6" x 0.25"
Voltage: 12V-24V DC
Max. Output Power: 144W (12V), 288W (24V)
Max. Output per Channel: 4A
Connection Types: (1) +/- DC power input,
(1) red/green/blue/+ outputs
Brightness Adjustment: 50 levels
Speed Adjustment: 50 levels
Color Modes: 16 total (static Red, Green, Blue, Amber, Purple, Cyan, and White; Flash through 7 colors; fading Red, Green, Blue, Amber, Purple, Cyan, and White, and RGB)
-
Good morning. Does this controller have to be placed somewhere visible for the remote to work or can it be hidden? How does it differ from the Wiser controller?
From rich at 8/30/12 3:51 AMThe remote for the Micro Remote Control LED Color Controller uses a Radio Frequency (RF) signal to communicate with the handheld remote. This means that the remote will not have to be in line of sight with the Micro Unit itself. This is the major difference between most of our Color Controllers and the Wiser. The Wiser Color Controller uses an Infrared Signal (IR) and so must be within line of sight with the remote. -
How many Splice Connectors can be connected to the Controller?
From Trev at 1/13/13 4:59 PMHello,
You can connect many splice connectors to the controller. Since the terminals on the controller can't accept too many wires, you may want to wire from the output of the controller to a 4-Way Terminal Block: http://www.elementalled.com/4-way-terminal-block.html
Then you can install the multiple RGB splice connectors to this block with more accommodating terminals.
Best,
Elemental LED Customer Service -
If i have two controllers, will one remote operate both controllers at the same time?
From Dano at 5/7/13 10:06 AMThe remote controls are RF and are married to an individual color controller. One remote cannot function across multiple controllers.
Loading...