High Power RF LED Color Controller
- Very Powerful RF Wireless Control
- 25 Color Modes
- High Quality RGB Color Blending
Our High Power RF Color Controller is a wireless radio frequency micro-control unit used for commanding any of our full-color RGB LED lights over longer distances. The High Power RF RGB Controller includes a wireless handheld remote control that allows you to change the mode, speed, and brightness of your color-changing LED lighting, whether LED strips, light bars, or RGB Puck Lights from a distance of up to 150 feet from the controller itself.
It's easy and simple to connect your RGB fixtures and 12V or 24V DC power source to this controller: just connect the positive and negative leads of your low voltage driver or adapter, and the three color wires and common positive wire of your color LED light to the controller, and you’re set to use any of 25 color-changing modes with your full color LEDs!
All of our color LED lights require a color controller to interface between the power source and the fixture, and this controller package has it all. This long distance RGB Controller features 7 colors (red, green, blue, purple, amber, cyan, and white) spread over 25 color-changing modes. You can choose 3- or 7- color flash, fade, or slow fade, as well as single color flashing and 2 color crossfade, or you can choose one of 7 static colors. This multi-color LED controller also features a brightness control with 256 levels of brightness, and a speed control that has 100 levels. All of these features can be accessed by the remote control, which also features play/pause and on/off switches.
This low voltage, low heat RGB LED controller is an exciting new addition to our line of energy-efficient, cutting-edge multi-color LED light accessories, and unlocks all the possibilities in color mood, whether for a party or special event; to create mood lighting in a living room, club, bar, or restaurant; or to add dynamic color-changing to any home or business.
-
High Power RF Controller
Just got done installing the high density rgb lights on my fifth wheel rv awning. Used the controller to run them was blown away by how it all worked. All were above and beyond my expectations. Would use again and again. THANKS!!!! -
color controller
Haven't installed it at my clients location yet, but where I have used it in my shop, I am totally satisfied...All functions seem to work well. Brightness, speed, and mode variables with the small green indicator light letting me know when I've reached the min or max adjustment.
Weight (Controller): 10 oz.
RGB Controller dimensions: 4.75 x 2.1 x 1 in.
Remote Control dim.: 3.4 x 1.5 x 0.65 in.
Antenna Length: 5.3 in.
Connection Mode: common anode
Input Voltage: 5V / 12V / 24V DC
Controller Freq.: RF
Remote Control Range: 150 ft. / 46m
Max. Output Current per channel: 4A
Max. Output Power: 60W (5V DC), 144W (12V), 288W (24V)
Device Temp.: 68° – 104° F / 20° – 60° C
-
Will this controller remember the last function or color setting when I turn the unit on and off?
Yes, it will remember the last function that it was set to - but only if you turn the unit on/off using the power button. However, if you entirely disconnect the power from the controller the function memory will reset. -
how to reset the LED controller?
You reset the controller just by changing the color-changing mode. -
Can I select any color to flash and any two colors to cross fade?
This color controller offers a certain number of preset modes, so you'll have a few modes with a single color flashing and a few that fade between certain colors, but you can't assign specific colors. For a controller that allows you make a full customizable light show, we recommend the Apollo DMX Color Controller. -
The product title states "One Million Color Options" yet the overview seems to indicate this has the same old mundane 7 preset color modes with the program change options.
Can you set this to any degree of RGB or not?
When referring to the "One Million Colors" this is to reflect the number of different colors that are projected throughout the different modes, and brightnesses. If you would like to select a particular color in the same color range I would suggest the Apollo Color Controller. http://www.elementalled.com/apollo-dmx-controller-with-pwm-for-led-lights.html
Thank you
Loading...