KOLORIS™ High Output Waterproof RGB LED Strip Light (formerly known as High Density Waterproof RGB Strip Light) is a multi-color LED light for home or business use that brings a million colors and a lot of excitement anywhere outdoors, and in any room in the house. KOLORIS strip is perfect for outdoor spaces like decks, patios, or landscape lighting in need of full color LED light. With the use of one of our RGB LED color controllers, this super bright RGB strip makes for an easy, economical LED light solution. Perhaps you have a special event or party outdoors, or need custom lighting for a bar or restaurant: this strip light is totally weatherproof, can be cut to a custom length, and is fully customizable.
KOLORIS is available by the the 9.5 foot spool with hard-wired waterproof RGB plugs that make for quick and easy outdoor and indoor installations. Each 9.5' spool comes with mounting clips, screws, end caps, and one female and one male splice connector. Installing it with the included mounting clips is as simple as using a screwdriver. Although twice as bright as standard strips, this high density color ribbon light consumes less than 5 Watts of electricity per foot, so it's energy-efficient in addition to being dynamic.
RGB Strip Lights are low profile and narrow, so they can go almost anywhere, and certainly in places that incandescent and fluorescent lights just don't fit. Unlike single color strips, multi-color LEDs require a color controller between them and the power source, whether it's a plug-in 12V adapter or hard-wired driver. The use of an LED color controller unlocks the million color possibilities in each strip. With these color-changing LEDs, being green has never been so colorful!
(Product SKUs: DI-12V-KOL-T-WP-RGB-9. Discontinued SKUs: EL-IMGWPRGBRIB12VSP, EL-IMGWPRGBRIB12V, EL-HDWPRGBSP, EL-HDWPRGB, EL-12V-KOL-T-WP-RGB-9)
Reviewed on July 2, 2013 by David
Input Voltage: 12V DC
Power Consumption: 4.32W / 360mA per ft.
Lumens: max. 127
Peak Wavelength: Red=626nm, Green=525nm, Blue=470nm
Max. Length on one run: 16.4 ft.
Spool Length: 9.5 ft.
Width: 0.5 in.
Depth: 0.2 in.
0.5 in. (between edges)
Cuttable: every 2 in. / 3 chips
Chip Type: 5050 SMD
Chips per foot: 18
Chip Spacing: 0.65 in. (between centers)
Beam Angle: 120°
Ambient Operating Temp.: -4° ~ +176° F / -20° ~ +80° C
Fixture Surface Temp.: -4°F ~ 122°F / -20°C ~ 50°C
IP Rating: IP68
UV/IR Radiation: None
Lifespan: 50,000 hours
No questions asked yet