High Density Waterproof RGB LED Strip Light offers all the same features and advantages as our standard Waterproof Color-Changing LED Strip, but it's twice as bright! These multi-color LED lights for home or business use will bring a million colors and a lot of excitement anywhere outdoors, and in any room in the house. This strip is a better solution than standard RGB strips for lighting needs in large outdoor spaces like decks, patios, or landscape lighting in need of some extra LED light. However, the strip light is not intended to be submerged and is not for use in salt water or chlorine conditions. With the use of one of our RGB LED color controllers, this super bright RGB strip makes for an easy, economical LED light solution. Perhaps you have a special event or party outdoors, or need custom lighting for a bar or restaurant: this strip light is totally weatherproof, cuttable, and fully customizable.
This strip is sold by the foot, so you can order the right amount for your lighting installation, whether it's large or small, and installing it with our waterproof mounting clips is as simple as using a screwdriver. Although twice as bright as standard strips, this high density color ribbon light consumes less than 5 Watts of electricity per foot, so it's energy-efficient in addition to being dynamic.
RGB Strip Lights are low profile and narrow, so they can go almost anywhere, and certainly in places that incandescent and fluorescent lights just don't fit. Unlike single color strips, multi-color LEDs require the Multi-Color LED Strip Splice Connector and a color controller between them and the power source, whether it's a plug-in 12V adapter or hard-wired driver. The use of an LED color controller unlocks the million color possibilities in each strip. With these color-changing LEDs, being green has never been so colorful!
UL #E348280
Input Voltage: 12V DC
Power Consumption: 4.4W / 367mA per ft.
Lumens: Red=51, Green=127, Blue=39
Peak Wavelength: Red=626nm, Green=525nm, Blue=470nm
Max. Length on one run: 20 ft.
Spool per: foot
Width: 0.5 in.
Depth: 0.2 in.
0.5 in. (between edges)
Cuttable: every 2 in. / 3 chips
Chip Type: 5050 SMD
Chips per foot: 18
Chip Spacing: 0.65 in. (between centers)
Beam Angle: 120°
IP Rating: IP68
UV/IR Radiation: None
Lifespan: 50,000 hours






Loading...