High Density Flexible LED Strip Light spool
- UL #E348280
- Bright task lighting
- 240 Lumens per ft.
- 2.9 Watts per ft.
- Warm and Neutral White
Our High Density Flexible LED Strip Light Spools include 16.4 feet at a price that's 20% off the by-the-foot price. High Density Flexible LED Strip Light is super bright LED strip lighting that has twice as many LEDs as our Flexible LED Strip Light. This light strip is sold by the spool at a discount, and is available in two different temperatures of white light. The UL Listed high output LED Strip is packed with high power SMD LEDs that combine to make a brighter, cheaper and warmer light than any fluorescent or incandescent fixture.
The energy efficiency, flexible design, and high intensity of LED strip lighting make it optimal for these indoor home and commercial lighting situations:
- Kitchen cabinet, under cabinet, and shelf lighting
- Exhibits, presentations, and project lighting
- Close application task lighting
- Cove and interior accent lighting
- Shop windows, window displays, and display case lights
- Light boxes, interior sign and signage light
Some of the features of the High Density LED Light include:
- UL #E348280
- RoHS certified
- Dimmable
- Can be dimmed with our Dimmable LED Driver and a 120V AC dimmer
- Can be dimmed with our Reign Dimmer and our standard 12V Driver
- Energy-efficient, using only 2.9 Watts of electricity per foot
- Low voltage 3528 SMD LEDs diminish the chances of electrical shock and fire danger
- Estimated life of 50,000 hours, which is 8 years if left constantly on
- Easy to install, with 3M sticky back adhesive
(Product SKUs: EL-HDSTRPSP-WW, EL-HDSTRPSP-NW, EL-HDSTRPSP-R, EL-HDSTRPSP-G, EL-HDSTRPSP-B, EL-HDSTRPSP-A, EL-BVWHTHDSP-WW, EL-BVWHTHDSP-NW, EL-BVWHTHDSP-4200, EL-BVWHTHDSP-5600, EL-BVWHTHDSP-PR)
-
customer service
Reviewed on September 26, 2012 by Kansas
The lights look and work great and the customer service was outstanding. If you have questions or just need help Daniel Kidd is the go to guy.
Thank Daniel for all your help and patience. -
Great Lights
Reviewed on September 18, 2012 by Bart
The lighting is perfect for our new kitchen. Easily concealed and smooth operation with the 12 dimmable driver. However, I recommend soldering wires at joints and not using the clip-on connectors as they are sometimes difficult to maintain a connection. Not a showstopper though and I'm pleased with the overall results. -
Just what I was looking for!
Reviewed on May 9, 2012 by Debbie
I have a lighted work table that just wasn't bright enough so we purchased the High Density LED lights and they are awesome!! Brightness for any need you have! Thank you! -
Rock Solid
Reviewed on January 25, 2012 by Jim
Rock solid product, easy to install and looks fantastic. The hardest part of the job was figuring out where to pull electricity from. Everything else was a breeze! -
High Density Flexible LED Strip
Reviewed on January 1, 2012 by Jennifer
Highly recommended. We installed the lights under the cabinets in our kitchen with recommended dimmer switch. I love these lights because the provide plenty of light with great coverage of the work space because you can cut the tape to pretty much any length. Tape adheres very well to cabinets. Connections are easy to make with recommended connectors. -
Perfect Even Lighting
Reviewed on September 27, 2011 by Dan Nelson
I just installed the high density flexible led strip light (warm white) for a customer and, WOW! We used it on the top of a wall of book cases and it shed a perfect amount of EVEN light. This product was very easy to work with and I especially liked being able to cut it to an exact length. As a LICENSED ELECTRICIAN, I have worked with many lighting products and I can say 100% that I will be installing this product in the home that my wife and I are currently building.
UL #E348280
Input Voltage: 12V DC
Energy Consumption per foot: 2.9W / 242mA
Energy Consumption per spool: 48W / 4A
Max. Length on one run: 16.4 ft.
Sold by unit: spool
Weight: 9 oz.
Spool Length: 16.4 ft.
Width: 0.3 in.
Depth: 0.1 in.
Chip Spacing: 0.3 in. (between centers)
0.2 in. (between edges)
Chip Type: 3528 SMD
Cuttable: every 3 chips / 1 in.
Beam Angle: 120°
Operating Temp.: 75° F / 25° C
Ambient Operating Temp.: -68° ~ +176° F / -20° ~ +80° C
UV/IR Radiation: None
Lifespan: 50,000 hours
| color | color temp. | lumens per ft. | IP rating | beam angle | CRI | chips per ft. |
| warm white | 2700k | 240 | 40 | 120° | 75 | 36 |
| neutral white | 4200k | 240 | 40 | 120° | 72 | 36 |
| neutral white | 5000k | 240 | 40 | 120° | 80 | 36 |
-
Regarding the High Density LED light strip which operates at 75 degrees F: How far from other surfaces does it need to be for heat safety issues? I've seen it's application in plastic lightboxes and am curious about what the fireproofing procedures are. Thank you for your time.
From Guest at 9/27/11 5:48 PMWe can't make any specific recommendations, but if the strip is more than an inch or two away from the surface, there should be no problem. 75 degrees F is the median operating temperature for the High Density Strip. Ventilating any space where the light is is also a good idea, mostly to preserve the life of the LEDs. -
I need to make a 90 degree bend and the shortest connector is 2 feet. I need the strips to butt at the bend do you offer a shorter 90 degree connector?
From Chas at 8/18/12 5:29 AMYes, a 3 inch version is available, see the Length dropdown. -
What is the Max length per transformer? Can a traditional 120 dimmer be used on the power side of the transformer?
From Bob at 8/20/12 12:13 PMThe maximum length of strip you may place on a driver would depend on the wattage capacity of the driver and the wattage use of the strip. You may not use a traditional 120v dimmer on the power side of the transformer
Thank you -
The distance from one of my strips will be 16 feet from where the transformer will be placed. Is this a problem and what is the impact?
From Bob at 8/20/12 12:14 PMThis should not cause a problem as long as you are using 16/2 gauge wire to complete that connection
Thank you -
installed the lights asked when I purchased about a dimmer swithch, was told I could get a Luton, it does not work.
From Deborah at 12/29/12 11:27 AM
I need to know specific on which is the correct dimmer switch to purchase.
love the lights would really like to finish the jobl Thank you
and happy new yearMany of Lutron's Low-Voltage Magnetic Dimmer Switches are compatible with our Magnetic Drivers. Here is a specific list of the types/model numbers of the Lutron Switches that we know are compatible with our Magnetic Drivers.
Ariadni (model #AYLV-600P, -603P)
Diva (#DVLV-10P, -103P, -600P, -603P; DVSCLV-10P, -103P, -600P, -603P)
Glyder (#GLV-600V)
Maestro Wireless (#MRF2-6ND-120)
Nova (#NLV-600, -603P, -1000, -1003P, -1500, -1503P)
RadioRA2 (#RRD-10ND)
Skylark (#SLV-600P, -603P)
Skylark Contour (#CT-103P, -103PH)
Vareo (#V-600, -1000)
If you misplace this list, it may be located under the 'Tech Specs' Tab on the Dimmable Driver page on our web site.
http://www.elementalled.com/12v-dimmable-driver.html
Thank you -
I am using pulseworx upb switching and controls. Can I use these to control and dim the leds?
From niki at 4/15/13 10:21 AMBeing that we do not sell pulseworx upb switches, we have not tested those products. We can never guarantee compatibility with our strips or drivers when using outside products.
Loading...