High Density 12V Brighter Flexible LED Strip Light by the foot
- UL #E348280
- 360 Lumens per ft.
- Cuttable
- 4.4 Watts per ft.
12V Dimmable Driver
$109.99
You’ll be amazed at our new High Density 12V Brighter Flexible LED Strip Light. Sold by the foot at a custom length of your choice, our High Density Brighter Flexible LED ribbon lights 12V packs up to a whopping 360 lumens of brightness per foot! It uses the same high power tri-chip LEDs as our standard brighter strip, but has twice as many per foot, making it up to four times brighter than Elemental’s standard Flexible LED Light Strip. There are 3 LEDs every 2 inches and 18 bulbs per foot. Yet the High Density Brighter Strip uses only 4.4 watts of electricity per foot!
This high-output, high-intensity LED lighting works well for lighting installations that are larger than most or require bright light that can illuminate over a longer distance than usual. The High Density Strip’s low profile of only 0.1 inches, and a width of less than half an inch, allows for use in almost any location. Whether for cove lighting, interior lighting, or exhibit lighting, large cabinet lighting, project lighting, and any sort of close application task lighting, this strip is very nearly the brightest of any of our LED fixtures.
Despite its brightness, the low energy consumption of this strip means you not only save money, but the low voltage power lessens the chance of electrical shock and fire danger. This solid state light strip is rated to last around 50,000 hours, which is nearly 6 years, if left on 24 hours a day!
(Product SKUs: EL-HDBRTR12V-WW, EL-HDBRTR12V-NW)
-
Spectacular aquarium lighting
Reviewed on September 28, 2012 by Rob
This was a test for a client that wanted to avoid the heat of metal halide. The results were much better than the expectations. Clearly this is the only way to go for tank lighting. I would go with a combination of warm white and neutral white LEDs. Elemental LED's customer service was phenomenal. -
Exceeded expectations
Reviewed on September 21, 2012 by Larry
The light strip worked extremely well and provided more than enough light to run the display. It was very easy to use and setup with a dimmer. -
No more halogens!
Reviewed on September 11, 2012 by Jerry
Used to illuminate a large display case with glass shelves. No heat and uniform bright lighting. I will never go back to halogen puck lights. -
Lots of light
Reviewed on June 22, 2012 by John
I put them into some alcoves in the wall and they light up the entire room. I'm going to buy some more for other places in the house. -
Very bright
Reviewed on January 10, 2012 by Mark
Exceptionally bright, but a lot more expensive than competitive SMD5050 strips. -
High density led strip
Reviewed on November 16, 2011 by Lynn
Great item especially with the solderless connectors. Planning on purchasing several spools shortly. Very bright. -
works as advertised
Reviewed on November 11, 2011 by merlin
i used them as a night light/secondary light in my bathroom. for what little they cost, it made a heck of a difference -
Very bright
Reviewed on October 19, 2011 by John
I bought this and the touch dimmer / 60W driver package. A couple of connectors too. Expensive but a one stop shop with people who can answer questions over the phone. Great quality as well! -
I'm Impressed
Reviewed on June 15, 2010 by Ted
I don't really see how it gets much brighter than this... I'm impressed.
UL #E348280
Input Voltage: 12V DC
Energy Consumption per ft.: 4.4W / 363mA
Max. Length of one run: 16.4 ft.
Sold by unit: foot
Weight: 1.5 oz.
Width: 0.4 in.
Depth: 0.1 in.
Chip Spacing: 0.65 in. (between centers)
0.45 in. (between edges)
Chip Type: 5050 SMD
Cuttable: every 3 chips / 2 in.
Ambient Operating Temp.: -68° ~ +176° F / -20° ~ +80° C
Fixture Surface Temp.: 68° ~ 104° F / 20° ~ 40° C
UV/IR Radiation: None
Lifespan: 50,000 hours
| color | color temp. | lumens per ft. | IP rating | beam angle | CRI | chips per ft. |
| warm white | 2700k | 360 | 40 | 120° | 75 | 18 |
| neutral white | 5000k | 360 | 40 | 120° | 80 | 18 |
-
Are the Flexible LED strip lights UL listed? Thank you.
From Guest at 7/15/10 10:30 PMThank you for your question. No, Flexible LED strip lights are not UL listed because they are "cuttable" in the field. No distributor carries UL listed strip lighting. However, our Flexible LED strip light is 12V and requires the use of one of our many choices of adapters or drivers to convert your home or business AC voltage to the 12V DC that is needed to power the strip lights. All of our adapters and drivers are UL listed.
Some of our adapters and drivers can be found here:
http://www.elementalled.com/shop-by-item/power-supplies.html
I hope this helps.
Randy -
Does this LED strip have a 3m adhesive back like the others? If not, how is it installed?
From Guest at 11/5/10 6:15 PM
Thanks!Yes, this has a 3M adhesive backing. -
Will the "flexible led strip light dc plug connector" brighter version work with this high density version as well?
From Guest at 6/3/11 10:26 AM
Yes it will, since both of these strips are 0.4 inches wide (as opposed to the standard Flexible Strip Light, which is 0.3 inches wide.)
Loading...