You’ll be amazed at our High Density 12V Brighter Flexible LED Strip Light, which is twice as bright as our standard Brighter Flexible LED Strip Light. Sold by the 16.4 foot spool, our High Density Brighter LED Strip packs up to 360 lumens of brightness per foot! The 12V High Density Brighter Strip Light uses the same high power tri-chip LEDs as our standard brighter strip, but has twice as many per foot, making it up to four times brighter than Elemental’s standard Flexible LED Light Strip. There are 3 LEDs every 2 inches and 18 bulbs per foot. Yet this super bright strip uses only 4.4 watts of electricity per foot! Plus, when you buy this strip in bulk by the spool, you get a volume discount price that's 20% less than the by-the-foot price.
This high-output, high-intensity LED lighting works well for lighting installations that are larger than most, or require a light that can illuminate over a longer distance than usual. Whether for cove lighting, interior lighting, or exhibit lighting, large cabinet lighting, project lighting, and any sort of close application task lighting, this strip is very nearly the brightest of any of our LED fixtures. Despite its brightness, the low energy consumption of this strip means you not only save money, but the low voltage power lessens the chance of electrical shock and fire danger. This solid state light strip is rated to last around 50,000 hours, which is nearly 6 years, if left on 24 hours a day! And all of Elemental's products are RoHs certified.
The High Density Strip’s low profile of only 0.1 inches, and a width of less than half an inch, allows for use in almost any location. Are you looking for a strip light that’s a little less bright? Take a look at our Brighter Flexible LED Strip Light, which is just twice as bright as the standard LED ribbon light.
(Product SKUs: EL-HDBRTR12VSP-WW, EL-HDBRTR12VSP-NW)
Reviewed on September 14, 2012 by John
Reviewed on September 7, 2012 by Eric
Reviewed on September 27, 2011 by Denton
Input Voltage: 12V DC
Energy Consumption per ft.: 4.4W / 363mA
Energy Consumption per spool: 73W
Max. Length of one run: 16.4 ft.
Sold by unit: spool
Length: 16.4 ft.
Weight: 10 oz.
Width: 0.4 in.
Depth: 0.1 in.
Chip Spacing: 0.65 in. (between centers)
0.45 in. (between edges)
Chip Type: 5050 SMD
Cuttable: every 3 chips / 2 in.
Ambient Operating Temp.: -68° ~ +176° F / -20° ~ +80° C
Fixture Surface Temp.: 68° ~ 104° F / 20° ~ 40° C
UV/IR Radiation: None
Lifespan: 50,000 hours
|color||color temp.||lumens per ft.||IP rating||beam angle||CRI||chips per ft.|