Flexible LED Strip Light L and T Sections

Flexible LED Strip Light L and T Sections are the perfect accessory for an LED light installation where continuous light is needed. T Sections are perfect when two LED strip light sections running at right angles to each other need to be joined. L Sections are the perfect accessory to complete an LED light installation where you need continuous light around a corner. L and T sections ensure a seamless and uninterrupted LED light strip installation, and allow multiple strip sections to be powered by the same source. Whether for cove lighting, on overhead beams, or in display cases, low profile LED Strip Light Sections can be used in many discreet locations. These L-shaped and T-shaped LED strips come with a 3M adhesive backing, which allows easy mounting virtually anywhere. Available in a standard Flexible LED Strip version, or in a High Density Flexible LED Strip version that's twice as bright, this is a UL listed LED strip.

Both the Flexible and the High Density LED Light Strip L and T Sections connect to other strip sections using the standard Flexible LED Strip to Strip Connector. Like all our Flexible LED Strip Light, L and T Sections are dimmable! Our strips can be dimmed either with our Dimmable 12V Drivers and a 120V AC dimmer switch, or with our Reign 12V Dimmer and our standard 12V Driver.

The flexible design and high intensity of LED lighting make it ideal for many commercial and home lighting installations such as:

• cove lighting
• interior lighting
• display case and exhibit lighting
• kitchen-cabinet lighting
• project lighting
• close application task lighting

Lighting installations using these Strip Light Sections should not exceed 48W total.

(Product SKUs: EL-STDT-WW, EL-STDT-NW, EL-HDT-WW, EL-HDT-NW, EL-STDL-WW, EL-STDL-NW, EL-HDL-WW, EL-HDL-NW)

UL #E348280

Lighting installations using these Strip Light Sections should not exceed 48W total.

Input Voltage: 12V DC
Available Colors: warm white, neutral white
Available Finishes: copper
Energy Consumption: 1W (standard), 2W (high density)
Color Temp.: 2700k (ww), 5000k (nw)

T Sections
Dimensions overall: Length = 4 in., Width = 2.1 in.
Strip Dimensions: Width = 0.3 in., Height = 0.1 in.
Luminaires per T Section: 9 (standard), 18 (high density)
Luminaire Spacing: 0.65 in. (standard), 0.3 in. (high density)
Flexible T Section Lumens: 35 (ww), 39 (nw)
High Density T Section Lumens: 70 (ww), 78 (nw)

L Sections
Dimensions overall: Length = 2 in., Width = 2 in.
Strip Dimensions: Width = 0.3 in., Height = 0.1 in.
Luminaires per L Section: 6 (standard), 12 (high density)
Luminaire Spacing: 0.65 in. (standard), 0.3 in. (high density)
Flexible L Section Lumens: 23 (ww), 26 (nw)
High Density L Section Lumens: 46 (ww), 52 (nw)

Beam Angle : 120°
CRI: 75 (ww), 80 (nw)
Fixture Surface Temp.: 68° - 104° F
UV/IR Radiation: None
Lifespan: 50,000 hours