Double Wide High Density Flexible LED Strip Light spool
Double Wide High-Density LED Strip Light is a super bright LED strip that is twice as bright as our High Density LED Strip Light and four times as bright as Flexible LED Strip Light. Sold by the 16.4 foot spool at 20% off the by-the-foot price, you won't find a better value for the lumen output. This LED tape light is our brightest strip and features two parallel rows of densely-packed, high output LED lights. This LED strip light is only about half an inch wide and one tenth of an inch high, and comes with a 3M adhesive backing that ensures easy mounting virtually anywhere. The flat LED strip emits light in a wide 120° light beam angle. The UL Listed Double Wide High-Density LED Strip Light is packed with high power SMD LEDs that combine to make a brighter, cheaper and warmer light than any fluorescent or incandescent fixture.
LED strip lighting is energy-saving, low heat, and safe, so it's optimal for these indoor home and retail lighting situations:
The Double Wide High-Density LED Strip Light is also dimmable, and it can be powered by our Dimmable 12V Driver which allows you to use your current wiring and a 120V AC dimmer, with no need to rewire or use external fuses. This LED light strip can also be dimmed with our Reign 12V Dimmer and a standard 12V Driver. The minimal energy consumption of this super bright LED strip not only means saving money, its low voltage power also diminishes the chances of electrical shock and fire danger. This LED strip light is UL Listed and RoHs certified.
(Product SKUs: EL-BVWHT2HDSP-WW, EL-BVWHT2HDSP-NW)
-
lots of light
My goal was to put a lot of light potentially into an undercabinet application. This fits the bill and more! Only drawback was that they do not have the connectors for the double wide and my soldering upside down skills are not the best. -
Nice lighting for room
I installed these lights in 4-foot strips over 4 beams in a high room (with the lights reflecting off the ceiling). The light produced is more than adequate. My only complaint is that the ends of the cut sections are difficult to solder to the power supply wires (if you have experience with and the right tools for circuit-board soldering, it's not a problem, but it is pretty delicate work).
UL #E348280
Lumens per foot: 280 (ww), 312 (nw)
Voltage: 12V DC
Energy Consumption per foot: 6W / 485mA
Max. Length on one run: 16.4 ft.
Luminaires per foot : 72
Luminaire Type: SMD
Available Colors: warm white, neutral white
Color Temp.: 2700k (ww), 5000k (nw)
Sold by unit: spool
Spool Length: 16.4 ft.
Weight: 8 oz.
Width: 0.55 in.
Height: 0.1 in.
Luminaire Spacing: 0.3 in. (between centers)
0.2 in. (between edges)
Cuttable: every 1 in. / 6 LEDs
Operating Temp.: 75° F / 25° C
UV/IR Radiation: None
Lifespan: 50,000 hours
No questions asked yet
Loading...