Double Wide High Density Flexible LED Strip Light by the foot
- UL #E348280
- 480 lumens per ft.
- 6 Watts per ft.
- White circuit board
- Twice as bright as high density
Double Wide High Density LED Strip Light is a super bright LED strip that is twice as bright as our High Density LED Strip Light and four times as bright as Flexible LED Strip Light. This LED tape light is our brightest strip and features two parallel rows of densely-packed, high output LED lights. This LED strip light is only about half an inch wide and one tenth of an inch high, and comes with a 3M adhesive backing that ensures easy mounting virtually anywhere. The flat LED strip emits light in a wide 120 light beam angle. The UL Listed Double Wide High-Density LED Strip Light is packed with high power SMD LEDs that combine to make a brighter, cheaper and warmer light than any fluorescent or incandescent fixture.
LED strip lighting is energy-saving, low heat, and safe, so it's optimal for these indoor home and retail lighting situations:
The Double Wide High-Density LED Strip Light can also be dimmed, and it can be powered by our Dimmable 12V Driver which allows you to use your current wiring and a 120V AC dimmer, with no need to rewire or use external fuses. This LED light strip can also be dimmed with our Reign 12V Dimmer and a standard 12V Driver. The minimal energy consumption of this super bright LED strip not only means saving money, its low voltage power also diminishes the chances of electrical shock and fire danger. This LED strip light is UL Listed and RoHs certified.
(Product SKUs: EL-BVWHT2HD-WW, EL-BVWHT2HD-NW)
-
Very Bright!
Reviewed on May 13, 2013 by DSHJ
Very bright lighting! Installed in two closets, and I'm happy with the output. The warm white isn't anywhere near 2700K. It's probably closer to 4000K. If the color temp had been more accurate, I'd give this a 5 star rating. -
Uplighting application
Reviewed on February 20, 2013 by Patty Karapinar
We used this product as an uplight, illuminating a cathedral ceiling from about 4' away at the top of a wall. I was concerned that it might not have enough brightness to create the desired effect, but it was very bright and lit the general area quite well, as well as providing a nice, dramatic statement. The only caveat is that with the dimmer, once we dim down more than about 50% we get a flicker, but I hear that this is typical for LED's. -
Engine room lights for our boat
Reviewed on October 31, 2012 by Fred Caron
We replaced 15 incandescents with five, one foot sections of these and they are great! -
replace a 30 yr old flourescent fixture
Reviewed on October 17, 2012 by Jeff
I used 4 feet of this and its a bit brighter than the fixture it replaces, not much of a power reduction tho. I like it. -
Great light
Reviewed on July 27, 2012 by Jon
Great lighting; spool gets a 5, this gets a 4. Reasons are 1) instructions were a little vague because it doesn't have a scissor notification (this was solved by an easy call to Elemental) and the connection is a little tricky at first. I suspect this is more the connector piece than the strip. Still, great product.
UL #E348280
Voltage: 12V DC
Energy Consumption per foot: 6W / 485mA
Max. Length on one run: 10 ft.
Sold by unit: foot
Weight: 0.8 oz.
Width: 0.55 in.
Chips per foot : 72
LED Chip Type: 3528 SMD
Height: 0.1 in.
Chip Spacing: 0.3 in. (between centers)
0.2 in. (between edges)
Cuttable: every 1 in. / 6 chips
Ambient Operating Temp.: -68° ~ +176° F / -20° ~ +80° C
Fixture Surface Temp.: 68° ~ 104° F / 20° ~ 40° C
UV/IR Radiation: None
Lifespan: 50,000 hours
| color | color temp. | lumens per ft. | IP rating | beam angle | CRI | chips per ft. |
| warm white | 2700k | 480 | 40 | 120° | 75 | 72 |
| neutral white | 5000k | 480 | 40 | 120° | 80 | 72 |
-
how many lights can you run off of one driver
From Guest at 12/9/11 3:21 PMThe amount of lights you can run on one driver is based on the driver's wattage. Each model strip light has a different wattage specification per foot required to power up. Please check out "Tech Specs" to confirm the wattage amount. -
Hello,
From Kampenwand at 10/30/12 6:13 AM
is it possible to get this LED Strip with two different colours (warm white / amber) to set individual the colour temperature.
Thanks
KampenwandWhereas we do not have a Strip Light that will have Warm White and Amber on the same Strip to create a Strip that can change it's color temperature, we do have the White Balance LED Strip Light. This LED Strip Light will allow you to adjust your color temperature anywhere between 2700° kelvin (Warm White) to 5000° kelvin (Neutral White)
If you would like a warmer color range, you could connect a Warm White Flexible LED Strip Light, and an Amber Flexible LED Strip Light to a White Balance Color Controller. This would allow you to select how bright each Strip Light is, and this will adjust the color temperature.
Thank you.
Loading...