Aaron Wasserman, one of our Customer Service Reps was inspired by all of our accesories to create how own light up Optimus Prime but decided to go in another direction and ended up with an LED Robot he named Glowbot.

Aaron says, “The Glowbot gets its name from the fact that its body is built around two separate RGB LED fixtures, each with its own RGB Color Controller. The torso is built around a Puck Light and the Head is built around a short piece of RGB Strip Light. These controllers allow me to control the color of the Glowbot’s torso and eyes independently.”

Materials used from Elemental LED:

1 x Self-Tapping Fuse Holder

7 x ATC/ATO Blade Fuses

2 x Waterproof LED Splitter Plug

2 x DC Wire Plug (female)

2 x Mini RGB LED Controllers

1 x Multi-Color RGB LED Flexible Light EZ Connector

2 x 3-Way Splice Connector

12 x Multi-Pole Splice Connector

1 x Puck Light (from an RGB 4-In-One LED Puck Light Kit)

4″ of High Density RGB LED Strip Light by the Foot

2 x 12V In-Line On/Off Switch

1 x 12V Adapter

1 x 2-Way DC Splitter Plug

 To learn how Aaron put together his little glowing friend, check out his step-by-step Instructables.

Have a project of your own using our lights that you would like featured on our site? Shoot us an email at social@elementalled.com.