Back to
share on facebook
share on twitter
email
Elemental LED leducation rss feed

Understanding the Different Types of Light Bulbs
| January 6th, 2011
Category: LED Tips and Installation, Recent Blog Posts

Tess 6W LED Replacement BulbChoosing a light bulb is no longer a simple choice. Understanding the differences between incandescent, CFL and LED light will make it easier.

Buying a simple light bulb is not so simple anymore. As technology has advanced and environmental awareness has increased, energy efficiency has become a paramount concern. It is common knowledge that choosing the right light bulb could drastically reduce your power bills and positively affect the environment, but which one should you choose?  Understanding the differences between incandescent, compact fluorescent (CFL), and light-emitting diode (LED) light bulbs will make choosing a bulb simple once more.

There are two key terms pertaining to light bulbs: watts and lumens. A watt refers to the amount of energy required to power a bulb. With incandescent bulbs, the number of watts has become synonymous with the level of brightness, even though a watt really does not tell you anything more than the amount of power necessary to light the bulb. Lumens, on the other hand, indicate the actual amount of light emitted by the bulb. For example, a typical incandescent 40W light bulb draws 40 watts of power and provides about 400 lumens of brightness. A CFL requires 9-13 watts and an LED light bulb uses 6-7 watts to provide the same amount of lumens.

Until recently, most homes used incandescent light bulbs. Incandescent bulbs emit light by generating heat. Unfortunately 90% of the power required to provide the desired brightness is emitted in heat rather than visible light. For this reason, incandescent bulbs are gradually being phased out, and in the United States will be banned entirely by 2014. CFLs have been touted enthusiastically in the past decade, but LEDs are beginning to surpass them because they require as little as half the power and last 10 times longer than a CFL. The table below contrasts the three technologies.

Incandescent CFL LED
Life Span 1,000 hours 6,000 50,000 hours
Watts 40W 9W 6W
Lumens 400 320 300
Heat Emitted 56.6 BTUs per hour 20.3 BTUs per hour 2.3 BTUs per hour
CO2 Emissions 3000 pounds per year 701 pounds per year 301 pounds per year
Contains Mercury No Yes No
RoHS Compliant Yes No Yes
Kilowatts of Electricity Used* 2190 KWh per year 531 KWh per year 228 KWh per year
Annual Operating Cost* $219.06 per year $53.06 per year $22.76 per year
Cost of Bulb $0.84 $2.49 (average) $24.99
Months to Recover Initial Expense N/A Vs. Incandescent: <1 month Vs. Incandescent:
1.5 months
Vs. CFL: 9 months

*30 Incandescent Bulbs per Year Equivalent

As you can see, LED light bulbs outperform CFLs in almost every category, and you recover any initial cost investment relatively quickly. In less than a year, you will have recouped your original investment and your savings will begin to accrue rapidly. While installing LED fixtures is an excellent way to go green, you can also use replacement LED light bulbs in your existing fixtures. Either way, you will have energy-efficient, attractive light that will save you money as well as help conserve the environment for years to come.

Jessica Sullivan is a freelance writer in Los Angeles who cares deeply about environmental conservation and preservation. If you would like to learn more about the benefits of LED lighting, you may want to visit ElementalLED.com.

12 Responses

  1. Kaverappa Prabhakar says:

    It would have been easy to understand if comparison/contrast was made based on same lumens (lumens row in the table) for all three types of light bulbs. For example: to get 400 lumens what would be wats for each type of light bulbs.

  2. ismail says:

    good explation…..looking for the clear understanding of cfl and led….i got the answer here…

  3. Admin says:

    Warm and cool have to do with the color temperature of the light, not the type of light. So for LEDs you want to look for the Kelvin rating. A high kelvin rating means the light is cooler. A lower kelvin rating means its warmer. For warm, look for a rating less than 3000K. Around 2700K is perfect and will give you that “incandescent” feel.

  4. Kathy Wilkins says:

    I think I understand the above differences but I am concerned with the the quality of the light . Which is warmest and incandescent like?

  5. DB says:

    I just purchased on Ebay 10-FEIT ELECTRIC LED 60 WATT ENERGY STAR BULB 850 LUMENS OMNI DIRECTIONAL 10PK for $89.99 (includes free shipping) So a 60 watt equivalent only costs $9.00 total!

  6. shohan khan says:

    I agree with Seri a little bit but we have to save our earth.we should conscious about the bad effect of Co2 & the affected….the article is good enough.

  7. Anil B Khairnar says:

    Understanding the differences between incandescent, CFL and LED light will make it easier.

  8. Ilona says:

    You’re very welcome!

  9. Prabu Selvarajan says:

    Really a very nice article with clear explanations :-) . Looking for the clear understanding of CFL and LED. I got the answer here. Thank you :-) .

  10. I’m starting up a online website directory and was wanting to know if I can submit your website? I’m hoping to increase my directory gradually by hand so that it maintains top quality. I will make sure and put your website in the appropriate category and I’ll additionally use, “Understanding the Difference between CFL and LED Light Bulbs | Elemental LEDucation” as your anchor text. Please let me know if this is alright with you by emailing me at: Dechick4140@gmail.com. Thankyou

  11. POONAM says:

    extremely nice explation…

  12. seri says:

    Your comparison of the three technologies is great, but I believe you are misleading consumers with the “Months to Recover Initial Expense” of the LED vs. the incandescent (and CFL). You are comparing the annual operating cost of 30 incandescent bulbs per year equivalent, but you are only looking at the initial cost of one bulb. The initial cost of purchasing 30 LED bulbs would be $749.70. Or, if you look at the operating cost of one bulb, you would save about $6 per year instead of $196 between an LED and an incandescent. Either way, the initial cost of the LED(s) cannot be recovered within one year of operation. It would take closer to 3.5 years at the usage rate you have (3.5-5 hours per day, everyday).

    I am in no way against purchasing LEDs and hope do so in the near future, but I don’t think people should be mislead by a ‘quick payback’ when there isn’t one.

Leave a Reply

Explore LED industry news, project tips, and LED education and inspiration on the Elemental LED blog

Find Elemental LED on Facebook!Find Elemental LED on Twitter!Find Elemental LED on LinkedIn!Find Elemental LED on Flickr!Find Elemental LED on Youtube!
Sign up to receive our newsletter and get a 10% off coupon.
Customer Service: 1.877.564.5051  |  answers@elementalled.com  |  Live Chat
Products  |  Our Company  |  Policies  |  Shipping Info  |  Contact Us  |  Careers  |  Press  |  Sitemap
Copyright ©2014 Elemental LED. All Rights Reserved.