35 Watt 12V Hard-Wired Driver

Elemental’s 35 Watt 12V Hard-Wired Power Driver provides the steady voltage and high efficiency you need to get the most from your LED lights. All our 12V LED drivers are energy efficient, eco-friendly, and safe, as they produce less heat and are more cost-effective than higher voltage light fixtures. In addition, this driver, along with our 20W and 60W Power Drivers, has an IP rating of 67 which means that it's waterproof!

If you’re working with a permanent low voltage LED lighting installation, it’s vital to use a Power Driver that provides a steady current. Our 35W Driver/transfomer is a hard-wired power source for your LED lights that is typically placed inside a wall or ceiling, in the attic or under the house, but is also compact enough to tuck into a corner. Think about using this waterproof LED driver outdoors also, whether near the pool or hot tub or a water feature, in a garden or landscaping, in a greenhouse, or anywhere your lighting setup will be exposed to moisture and the elements.

Our mid-range 12V DC Drivers are compatible with electrical systems from 100V to 240V AC, with frequencies of both 60 Hz (North and Central America) and 50 Hz (the rest of the world), and are available in three versions: 20W (1.7 A), 35W (3A), and 60W (5A). This 35W driver, for example, can power up to 24 feet of our Flexible LED Strip Light (which draw 1.44W per foot) or 10 pucks (at 3.5W each) or 10 recessed down lights. The 20W driver powers up to 13 feet of our Flexible LED Strip Light (which draws 1.44W per foot) or 5 pucks (at 3.5W each) or 5 recessed down lights. The 60W will power as many as 17 pucks or as much as 41 feet of strip lighting.

This driver is RoHS (Restriction of Hazardous Substances) compliant, ensuring that no toxic materials were used in its manufacture.

Weight: 13 oz.
Length: 5.8 in.
Width: 1.5 in.
Height: 1.2 in.
Lead Wires Length: 22 in.
Input Voltage: 100 – 240V AC, 1.1A
Frequency: 50/60 Hz
Output: 12V DC, 3A
Power: 35W
IP Rating: 67