24V LED Strip Light DC Plug

With the 24V LED Strip Light DC Plug, there is no need to solder anymore! This plug connects our High Density 24V Brighter Flexible LED Strips to a 24V DC power adapter. This plug is a special solder cable that is designed and manufactured exclusively for Elemental, and features the Flexible LED strip light connector compatible with our 0.4 inch wide strips at one end, and the standard 1/8 inch DC plug connector that fits our 24 Volt DC adapters at the other. Please note that this is not compatible with our 12V Brighter strips, nor with our standard flexible strips lights, which are 0.3 inches wide, and also does not fit our 12V DC adapters and accessories, which use a 1/4 inch DC plug.

The 24V LED Strip Light DC Plug is an easy-to-use accessory that is essential for a plug-and-play, solder-free 24V DC LED light installation and has the following advantages:

• Eliminates need to solder
• Provides a permanent, secure connection
• Saves Time

And using this 24 Volt connector couldn't be simpler. Instructions for use:

1. Pull the brown tabs out, away from the strip connector
2. Determine which end of the strip matches the polarity of the connector (that is, properly align the + and - of each)
3. Slide one end of the Strip Lighting into the small LED molex clamp, with the strip facing away from the brown tab
4. Using care, firmly secure the clamp with the two small brown tabs by pressing them toward the LED strip.
5. Plug in your 24V DC adapter!

Weight: 0.2 oz.
Length: 5.7 in.
Width (strip connector): 0.4 in.
Height: 0.5 in.
Voltage: 24V DC
Connector Types: (1) DC 1/8 in.,
      (1) 24V Brighter Flexible LED Strip Light