16 Foot Flexible LED Strip Light Kit
The 16 Foot Flexible LED Strip Light Kit is an all-inclusive, plug-and-play package that lets you set up an LED light installation in minutes. This LED light kit is perfect for lighting large areas or areas in need of extra light: shelf, display case, display window, and cabinet lighting; project, presentation, and exhibit lighting; workshop, garage, and basement lighting; or any interior situation. This LED lighting kit is available in your choice of brightness level: our standard Flexible LED Strip (good for general accent and task lighting), Brighter LED Strip Light (for coves and cabinets), the popular High Density LED Strip (for bright task lighting), and the incredibly bright High Density Brighter LED Strip. All of the available strips in these LED light kits are dimmable.
This kit includes everything you need for your installation:
Here are just some of the features of our LED Strip Lights:
- Self-adhesive 3M backing for easy installation on any dry, smooth surface
- Fits in places that a light bulb can't
- Cuttable to a custom length for your project
- Only a quarter of inch wide and less than a quarter inch high
- Dimmable with an LED Dimmer
- This strip light spool uses less power than a 40 Watt incandescent light bulb
- UL Listed: #E348280
(Product SKUs: EL-16STRPKT-WW, EL-16STRPKT-NW, EL-16STRPKT-R, EL-16STRPKT-G, EL-16STRPKT-B, EL-16STRPKT-A, EL-16STRPKT-PK, EL-16STRPKT-PR, EL-16BRTKT-WW, EL-16BRTKT-NW, EL-16HDKT-WW, EL-16HDKT-NW, EL-16HDKT-R, EL-16HDKT-G, EL-16HDKT-B, EL-16HDKT-A, EL-16HDBRTKT-WW, EL-16HDBRTKT-NW)
-
suave
I used this lights for under cabinets in kitchen - smooth, continuous, sufficient for working areas light; easy to install - we've enjoyed these lights for 5 months.Wonderful product , and the company was very instrumental in helping me to choose the type of lights. -
LED Strip Light
Great product and service. I will contact you for my next lighting project. -
LED strip light for kitchen undercabinet
Used to replace xenon pucks, which were hot, burned out often, and had messy wiring. The strip light is a very neat installation, no messy wiring. The warm color looks good and is plenty bright. Love it.
UL #E348280
Strip Voltage: 12V DC
IP Rating: IP40
Fixture Surface Temp.: 68° - 104° F
20° - 40° C
UV/IR Radiation: None
Lifespan: 50,000 hours
-
If I want to use these as under cabinet lights in my home and need to put the lights on two separate walls that are across from each other and not adjacent do I need to have two receptacles and two adapters? I would like them to be on the same switch. Is this possible and can I dim them together? I am an electrician by trade.
Yes, you can definitely do this. In addition to using the kit's LED Adapter Splice Cable, you can order an the right amount of our 18/2 Lamp Wire by the foot. Then you would connect, in this order, the adapter, the dimmer switch, and then the adapter splice cable (which is 42 inches long), which gives you two bare wires. So you connect one strip section directly to the adapter splice cable, then bundle the 18/2 Wire to the splice cable also, joining the three pairs of wire with wire nuts, and use the 18/2 wire as an extension to the other strip section.
-
I want to connect two separate banks of cabinets. I will need to use about 25 feet of wire to fish through the wall and basement. Should I use a wire larger than the 18/2 to avoid a voltage drop over this long distance so my lights aren't dimmer at the end of the run?
18/2 gauge will not experience Voltage Drop until about 50 feet, so running 25 feet of this gauge wire should be just fine.
-
I would like to install this system using a Lutron "Diva" Electronic Low Voltage dimmer switch(DVELV-300P-CC3) to control the input power to the included 60W power adapter rather than using the included DC dimmer switch. This will provide a more professional finished look. Is the power adapter an electronic transformer? Will Elemental LED endorse this configuration? http://www.lutron.com/TechnicalDocumentLibrary/Spec%20Guide%20Volume%201%20Diva.pdf
The 60W plug in adapter functions as a Pulse Width Modulation power supply. It will not work with a Lutron Magnetic Low Voltage Diva Switch. You will require a Magnetic Power Supply which is our 60W 12V Dimmable Driver. The other option would be to use one of our 12V Reign Dimmer switches with your 60W plug in adapter. The Reign Dimmers have just went on sale and can be found here on the webpage: http://www.elementalled.com/reign-12v-led-dimmer-switches.html.
Loading...