12V Mini Driver
- Available in 3W, 6W, 10W
- Compact Design
- Steady Current
- Low Heat and Safe
LED Adapter Splice Cable
$3.99
In order to get top performance from your LED lighting, it is crucial to ensure a steady voltage. Our 12V Mini Driver provides steady voltage along with high efficiency, so you will not only get the most from your LED lights (or non-LEDs), but you will also see savings on your power bill when it comes to running the light and producing less heat. All our 12V LED drivers are energy efficient, eco-friendly, and safe.
If you’re working with a permanent home installation, it’s vital to use the Mini Driver as it provides an extremely steady current. It is a hard wired power source that is nonetheless flexible: if you’re using it in new construction or renovation, it can easily be placed out of sight in a wall or ceiling as well as in the attic or under the house. But the real advantage of our 12V mini driver is that it’s compact enough to tuck into a corner in a shelf or under a cabinet, or even in a light box or large picture frame, so you can avoid making holes in the wall to light your home. Mini drivers are perfect for indoor and outdoor sign and signage lighting.
Our 12V Mini Driver is available in three versions: 10W (0.83 A), 6W (0.5 A) and 3W (0.25A). 10 watts will power 6 feet of our Flexible LED Lights, 6 watts will power 3 feet and 3 watts will power almost 2 feet of strip lighting.
This driver features short circuit and overload protection, and is RoHS (Restriction of Hazardous Substances) compliant, ensuring that no toxic materials were used in its manufacture.
For optimum performance, do not load the power supply to more than 80% of its labeled rating.
(Product SKUs: EL-ESDRV3W, EL-ESDRV6W, EL-ESDRV10W)
-
Mini Driver
Purchased the driver to use with a 6 watt MR16 light. Working properly for over a month with out any problems -
Little Super Guys!
These little guys are great!
CE certified
UL Certified Component
For optimum performance, do not load the power supply to more than 80% of its labeled rating.
Weight: 3.5 oz.
Length: 2.6 in.
Width: 1.4 in.
Height: 0.95 in.
Lead Wire Lengths: 6 in.
Input: 100V-240V AC, 0.22A, 50/60 Hz
Output: 12V DC
Power Ratings: 3W / 6W / 10W max.
IP Rating: IP67 (wet location)
-
Does the power supply, per its listing, have to be installed in an electrical junction box?
Building codes differ from state to state and may have requirements about installing power supplies, but as long as the connections of the driver are correct and properly insulated, it is safe to install 12V drivers outside of a junction box. -
How far can the conductors run from the power supply to the LED's without too much voltage drop to prevent the LED's from lighting?
Voltage drop varies, with more drop from higher-wattage drivers, and less from lower-wattage drivers. Our general rule of thumb is that voltage drop won't be a factor with distances less than 50 feet between power source and fixture. -
Can one use an AC dimmer on a a 10W, 12V mini driver?
Our Mini Drivers are not compatible with 120V AC dimmers, but you can use our Reign 12V Dimmer with the Mini Drivers. -
In order to meet the National Electric Code (NEC) the 120 volt connections have to be in a rated electrical box.
Due to their small size, these Mini Drivers easily fit inside virtually any rated electrical box. -
can the mini driver be used with the Reign 12v dimmer?
Yes, our Reign Dimmer Switch can be used with our 12v Mini Driver.
Loading...