The 12V Class 2 Driver is perfect for installations using our dimmable LED lights which need to meet CLASS 2 electrical regulations. These 12V DC transformers power any of our dimmable LED lights, and allow you to dim our low voltage LED lights with a common 120V dimmer switch. Our 12V Dimmable LED Drivers are compatible with many models of dimmer by brands such as Lutron and Leviton, which are commonly used in home and commercial installations, and available at most home improvement stores.
The 20 Watt and 60W Class 2 LED Drivers are great for small home installations. The 300W version of the Class 2 Driver is a multiple output dimmable driver that has been specifically designed to power large lighting installations while meeting strict CLASS 2 electrical regulations. Large-scale low voltage projects would normally require multiple 60W (or smaller) drivers to meet Class 2 restrictions. This driver meets code specifications by offering six 50 Watt output circuits on individual breakers. The cost effectiveness of a 300 Watt driver has significant impact for installations that require four (or more) 60 Watt drivers.
The Multiple outputs are especially useful in installations that will be expanded in stages (Kitchen Remodels, Office Upgrades, or Growing Businesses). This model not only meets inspection codes, but also enables large low voltage lighting control from only one dimmer switch (see the Tech Specs tab for a list of compatible dimmers).
Note: This driver is NOT for use with our Reign LED Dimmer Switch, and is for indoor use only.
(Product SKUs: EL-20WDIM-C2, EL-60WDIM-C2, EL-6X50WDIM)
UL Listed (UL 1310)
Class 2 Rated
Input: 120V AC / 60 Hz
Output: Without Boost: 11.6V DC, With Boost: 12.6V DC
Compatible with: 120V AC magnetic low voltage dimmers. The following Lutron brand 120V dimmers are examples of switches that are compatible with our Dimmable Drivers:
Click here to download a PDF of this list of compatible 120V dimmers.
Dimensions (20W): L=5.03 in., W=2.14 in., D=2 in.
Dimensions (60W): L=6.06 in., W=2.59 in., D=2.2 in.
Dimensions (300W): L=7 in., W=7 in., D=3.2 in.
Housing: powder-coated steel
Protection Rating: IP32/Nema 3R
Working Temp.: < 70° C in a 40° C ambient, fully loaded.
Ambient Operating Temperature: -20° C ~ 40° C
Knockouts: 4 x 1/2 in.
DO NOT USE THIS DRIVER WITH A REIGN DIMMER SWITCH.
For optimum performance, do not load the power supply to more than 80% of its labeled rating.
No questions asked yet