10' Full Color LED Strip Light Plug-and-Play Kit
- UL #E348280
- All-inclusive
- Remote-Controlled
- Exciting
- Standard or High Density Strip
Our 10' Full Color LED Strip Light Plug-and-Play Kit is an eco-friendly, full-color LED lighting installation that brings lots of style and color to a living room, rec room, home entertainment center, or to any bar, club, or special event. Our 10 Foot RGB LED Strip Light Kit is available with either standard strip or high density strip, which is twice as bright. This low-profile and bright color-changing LED light strip kit has everything you need for making a super-looking color display, whether you're just looking for something simple to install or need a color splash for a temporary event or party. This kit contains:
- 10 feet of RGB LED Light Strip, standard or high density
- 1 x High Power RF RGB Color Controller with remote
- 1 x RGB Strip Light EZ Connector
- 1 x female LED Adapter Splice Cable
- 1 x 12V DC plug-in adapter
With a few connections, this kit is ready-to-use in many installations, such as:
- Restaurants, lounges, casinos, and retail stores
- Any room in the home that requires color and pattern lighting to create a mood
- Lighting art and accent lighting
- Displays for trade show exhibits and office presentations
- Coin-operated vending machines and arcade games
- Shop window displays and product display cases
The High Power RF RGB Color Controller has 25 RGB color-changing and static color modes available and each mode has a brightness control with 256 levels of brightness, and a speed control that has 100 levels that can be adjusted wirelessly with the remote control included with the unit. The remote control has a control range of up to 150 feet from the controller itself. The controller connects to the adapter with the LED Adapter Splice Cable, and joins the RGB Strip with the Multi-Color Flexible RGB Strip Light EZ Connector.
Kit Weight: 21 oz.
Voltage: 12V DC
Power Consumption: 22W (standard), 48W (high density)
Strip Specs:
UL #E348280
Dimensions: L = 60 in., W = 0.4 in., D = 0.1 in.
Bulbs per ft.: 9 (standard), 18 (high density)
Standard LED Spacing: 1.3 in. (between centers)
1.1 in. (between edges)
High Density LED Spacing: 0.65 in. (between centers)
0.5 in. (between edges)
Cuttable: Every 3 LEDs / 4 in. (standard), 3 LEDs / 2 in. (high density)
Beam Angle: 120°
Lumens (standard): R=18, G=29, B=9
Lumens (high density): R=36, G=58, G=18
UV/IR Radiation: None
Lifespan: 50,000 hours
Controller Dimensions: 4.75 in. x 2.1 in. x 1 in.
Remote Control Dimensions: 3.4 in. x 1.5 in. x 0.65 in.
36W Adapter Dimensions: L = 3.8 in., W = 1.8 in., D = 1.4 in.
60W Adapter Dimensions: L = 4.7 in., W = 2 in., D = 1.25 in.
Length (cable): 5 ft.
Input: 100V - 240V AC
Output: 12V DC
Frequency: 50/60 Hz
-
Is there any way to join extra lights to make this kit 35ft long, I would like 1 remote to control approx 35 to 40ft of strip light to go around my home theatre ceiling. Of if you could suggest an alternative
Yes. You can attach a Multi-Color RGB LED Strip to Strip Connector SKU: EL-BVSTRPRGBCON to the ends of two strips to create one longer strip.
If you will be running 35 - 40 feet of strip light, you will also need a few RGB LED Signal Amplifiers SKU: EL-SJRGBAMP as well. If there is more than about 16 feet of strip light in one stretch, without an amplifier, you may experience "voltage drop", resulting in dimmer lights either at the end of the strip, of throughout the entire strip. For your length of lights, I would suggest 2-3 amplifiers to ensure maximum performance. -
Can you add multiple controllers to these kits and still use a common power source?
Yes, you can cut the 10 foot strip into smaller sections and assign a controller to each section, and use 2 strand wire for each section and bundle the wires together at the power source. -
I want to use these for perimeter lighting in a sauna. Are they waterproof, or can you recommend full color / high density that is?
This kit itself is not actually rated for outdoor or wet location. What you would need is High Density Waterproof RGB LED Strip Light http://www.elementalled.com/high-density-waterproof-rgb-led-strip-light-by-the-spool.html . If you would like to tell us more about your project you can always email us at answers@elementalled.com, this way we can build you a custom quote with all the necessary components, color controller, power supply, etc.
Loading...